APSCO, Inc.

 

Apsco has enjoyed growth over the past 20 Years.  Our philosophy is to provide wastewater, water, and private industrial customers top tier equipment products built for trouble free operation and longevity.  We believe in building and maintaining long term relationships with our customers.  We value repeat business from clientele who find Apsco personnel competent, fair, and willing to go the extra mile to insure satisfaction. Apsco became the sole distributor for ScrewSucker™ North America in 2001 and had doubled sales every year since its existence.  As the most fuel efficient portable pump in the world; Municipalities and Contractors have utilized the ScrewSucker™ in various applications for its incredible reliability and robust design.  Consistent with Apsco’s 20 years of success, standing behind a top tier product means top tier service.  We are responsive 24/7 and keep a large inventory for fast delivery of pumps and replacement parts. For additional company information please visit their website at http://www.apsoco-inc.com. 

ScrewSucker 4" Portable Pumping System

Properties

  • Clog resistant impeller and liner in wear resistant configuration.
  • Impeller has large free passage of 3”.
  • Fuel consumption is approximately 50% lower than conventional dirty water pumps with the same free passage.
  • Large pump capacity combined with a low engine power rating.
  • The pump set primes very quickly even at large suction heights.
  • The vacuum system can handle large quantities of air. Up to 59 cfm, standard is 15 cfm.
  • Capable of pumping unscreened raw sewage water.
  • Capable of pumping viscous liquids.
  • The wear liner can be adjusted from outside the pump. R1 and R3 configuration.
  • Electronic vacuum system.
  • Pump is capable of long running times in idle conditions.
  • Pump can dry prime down to 26 feet.
  • Automatic start /stop system (level switching).
  • Double shaft seal immersed in oil bath (sic/sic and carbon/ceramic).

Applications

  • Pumping out sewage pits and cellars.
  • Drainage of building sites.
  • Well pointing and drainage lines.
  • Pumping bentonite and sludge.
  • Emergency mobile pumping station.

Technical Specifications:

  • Discharge and suction connections Flange – 4” 125 LB. ANSI.
  • Capacity (maximum at 1800 RPM) 637 GPM @ 27 Feet.
  • Head (maximum at 1800 RPM) 50 Feet @ 263 GPM.
  • Pump type and manufacture D100-H01 or D100-H03R Hidrostal Centrifugal Screw.
  • Engine type and make Hatz / Single Cylinder Air Cooled Diesel Engine.
  • Engine power rating Standard 5.4 HP at 1500 RPM. Maximum 9.3 HP at 1800 RPM .
  • Required pump power 4 HP @ 1500 RPM and 6.7 HP @ 1800 RPM.
  • Engine starting system 12 volt, manual, automatic level switching and engine protection system.
  • Capacity diesel tank 48 gallons sufficient for 180 hours continuous running at max load.
  • Acoustic canopy Noise emissions reduced to 55 dB(A) at 23 Feet distance. The canopy doors can be locked. The canopy serves as a containment vessel to prevent leakage from the unit. The vessel has a built in oil/water separator. A hand pump is built in to assist in pumping out diesel engine sump and containment fluids. The entire canopy is constructed from galvanized steel sheeting.
  • Weight Approximately 2778 lbs.
Back to Top

 

 

©2010 Vision Equipment
Web Design and Hosting by MySmallBizWeb.com