EPIC International , Inc.

 

EPIC International, Inc. provides environmental products for innovative conservation.  For more company information please visit their website at http://www.epicintl.com.

Mixers
  • Rugged, reliable, all domestic fabrication
  • Competitive value
  • High pumpage efficiency
  • Quiet/reversible
  • Extended warranty
  • All stainless construction options: FRP Float with SS Volute
  • Multiple Seals
  • #316 L SS Available for Select Applications
  • Motor Speeds from 720 to 1800 RPM (60 Hz)
  • Dual Speed Motors Available
  • 50 Hz Motors Available


 
Back to Top

 

Screw Pumps

Special Features

  • ISO 9001 certified
  • Full penetration welding according to AWS, DIN, ASTM, or API standards
  • Internal bulkheads provide additional watertight seals of the torque tube
  • Endplates are watertight welded with threaded holes for the shaft connections
  • Fully self-aligning upper and lower bearings
  • Two (2) seals in lower bearings
  • Separate radial and axial upper bearings
  • Flow through grease lubrication for lower bearing
  • Lifting eyes built in
  • Screed bar tack welded to tip of flights for screeding
  • Shot blasting to SA 2.5 (SSPC-SP10) standards
  • Prime coating is standard for all parts above and below water level
  • Factory final coating under environmentally controlled conditions is suggested

 
  • Extremely Reliable
  • Non-clogging
  • Highly efficient
  • Simple construction
  • Low Speed
  • Low noise
  • Long life due to low wear
  • Self regulating/Automatic priming
  • Constant output
  • Easily accessible
  • Low maintenance costs
  • Low energy costs

 

T: Touch Point
T1: Maximum Pumping Point
S : Chute Point
V : Fill Point
L : Flight Length
Sp : Pitch
D: Screw Diameter
d: Torque Tube Diameter
hv: Filling Height
H : Static Lift = Maximum Pumping Point minus Filling Point
. : Head = Chute Point minus Touch Point

 

Surface Aerators

  • Performance And Durability - EPIC Aerators are designed with performance and durability in mind. The EPIC structural components provide both strength and enhanced performance.
  • Construction With a Purpose - The unique C-shaped radial beam construction stiffens the unit and distributes the operating loads while providing hydraulic channeling of the pumped liquid. The swirling mass of liquid is straightened as it exits from the deflector, changing the trajectory of the liquid to a flatter dispersion pattern. This lower trajectory reduces aerosols and misting. The radial beams act to deflect the rotational forces of the emerging liquid, resulting in a stable float.
  • Serviceability - Difficult to reach below water cross vane stabilizers are not needed, thus eliminating underwater catch points for debris.

 

 


Features and Benefits

  • Sturdy, all stainless steel construction with no concentrated load points.
  • The float construction has no potential leaking points caused by bolt or other penetrations through the stainless steel skin.
  • No structural castings with the potential for hidden gas and sand hole porosity, resulting in stress concentrations and unexpected imbalance.
  • Internal hardpoints which reinforce and stiffen the float and the volute tube.
  • Welded in accordance with requirements of AWS standards.
  • Radial C-beam construction for load distribution, rigid construction, and improved liquid dispersion.
  • NIBRAL, dynamically balanced, weedless propellers.
  • Floats are injection filled with 2.25 to 2.50 pcf density closed cell polyurethane foam.
  • Standard stand-off power cable support bracket. 100% reserve buoyancy factor is standard.

 

©2010 Vision Equipment
Web Design and Hosting by MySmallBizWeb.com